Blower Products When transporting dry bulk materials, there are many benefits to using a pneumatic blower as opposed to a mechanical system. Truck blowers use pressure systems to load and unload dry bulk materials from tanks. Today we’re discussing how blower products in GA can work for you in your business.

Pneumatic blowing systems are very proficient in transferring powders, granules and other dry materials, with the most common examples being cement blowers and sand blowers. But these systems also often carry plastic pellets and flour in bulk as well. Dry materials work best for this type of pressure system.

Pneumatic systems utilize a mixture of pressure and air to move materials through a line or pipe, from one area to another. The whole system typically includes a source blower, a tube to transport the materials, and a collection receptacle.

Where the pneumatic blowing source is positioned in the system decides whether it moves the material by blowing it forward or creates a vacuum that sucks it through the pipeline. When located at the start of the system, the air mover drives air through the system, and the system functions under pressure by propelling it forward.

When located at the end of the system, the air blower pulls air through the system, and the system runs under vacuum, pulling the materials in reverse. By controlling the blowing pressure or vacuum inside the lines, the system effectively and efficiently relocates materials.

Mechanical moving systems operate in a straight line, with few directional changes. Each direction would typically require its own motor and drive to operate it. Mechanical transport systems may be out in the open rather than closed, possibly creating dust.

It includes a comparatively large number of moving parts that occasionally require maintenance to keep operating. The system also tends to take up more space in a given area.

On the other hand, a pneumatic blower products in GA use a simple, small-diameter pipeline to move materials from one location to another. This pipeline can be arranged using bends and curves to fit around current equipment.

This provides the system with more layout flexibility, and the system takes up a smaller area compared to a larger, mechanical belt. It is completely enclosed and typically has few moving parts, which means less materials will be lost by the wind or the kick-up of moving parts.

Blower products in GA – such as Garden Denver CycloBlowers – provide the maximum output-to-weight ratio and run much more smoothly, with a relatively quieter function. The lower discharge temperature lengthens the life of the blower and the entire system.

Because there is no lubrication in the compression chamber, oil-free air is moving the materials, which guarantees no contagion of products. This is particularly critical for the transport of food or consumables. Reduced engine speeds for the pneumatic system also mean there is less fuel consumption and maintenance cost overall. If there are fewer parts to maintain, there is less room for operational error.

Pneumatic systems are by far the most compact and efficient way to transport dry, bulk goods. They are cost and speed efficient and can profit your business in many ways. They take up less room and provide optimal work output.

If you would like more information, or want to know which blower products in GA can help your business, call us today to speak with one of our sales experts.

Leave a comment

Your email address will not be published. Required fields are marked *